SW-M818 User's Guide on NFC Functions

SW-M818 User’s Guide of NFC Card

1. Adding NFC Cards

  • 1.1 Swipe the management card, and the NFC indicator light on the display will start flashing rapidly.
  • 1.2 Then swipe the secondary card, and the indicator on display will be fullyon with the NFC indicator light remaining steadily lit, indicating a successful setup of the secondary card.
  • 1.3. If you need to set up multiple secondary cards, simply follow the above procedures again.

2. Using NFC Cards for Power On/Off Operations

  • 2.1 Powering On: To power on: Swipe the secondary card and then remove it, and the display will light up. The NFC indicator light will also remain steadily lit, indicating that the display has been powered on.
  • 2.2 Powering Off: To power off: Swipe the secondary card and then remove it, and the display will turn off. Simultaneously, the NFC light will start blinking slowly. After blinking for 20 seconds, the NFC light will stop blinking and turn off, indicating that the dashboard is powered off.

Note: The NFC detailed operations may vary with different vehicle brands, please refer to their original user manuals for instruction.